General Setup; Setting The Mode Timer; Setting The Paper Type - Ricoh FAX 1190L User Manual

Chapter 2

General Setup

Setting the Mode Timer

The machine has two temporary mode keys
on the control panel: Fax and Copy. You can
change the number of seconds or minutes
the machine takes after the last Copy
operation before it returns to Fax mode. If you
select Off, the machine stays in the mode
you used last.
1
Press Menu/Set, 1, 1.
1.Mode Timer
2
Press ▲ or ▼ to select 0 Sec,
30 Secs, 1 Min, 2 Mins, 5 Mins or
Off.
Press Menu/Set.
3
Press Stop/Exit.
2 - 4

Setting the Paper Type

To get the best print quality, set the machine
for the type of paper you are using.
1
Press Menu/Set, 1, 2.
2.Paper Type
2
Press ▲ or ▼ to select Plain, Thin,
Thick, Thicker, Transprncy
(Transparency) or Recycled (Recycled
paper).
Press Menu/Set.
3
Press Stop/Exit.
Note
■
The machine ejects paper with printed
surfaces face down onto the output paper
tray in the front of the machine. When you
use transparencies or labels, remove
each sheet immediately to prevent
smudging or paper jams.
■
You can select Transprncy in Step 2 if
Letter, Legal or A4 paper size has
been selected (Menu/Set, 1, 3).