General Specifications - Ricoh FAX220 Service Manual

1. INTRODUCTION

1-1. General Specifications

Type
Telephone Circuit
Document Size
Scanning Method
Scanning Width
Effective Printing Width
Scan Resolution
Transmission Time
Data Compression Method
SAF Memory Capacity
Modulation Method
Transmission Data Rate
Protocol
Printing Method
Printer Paper Size
Dimensions
Weight
Input Voltage
Recommended Operating Environment
Item Specification
Desktop transceiver
PSTN/PBX
Width: 148 - 218 mm
Length: 105 - 600 mm
Thickness: 0.05 - 0.15 mm
Flat bed, CCD
216 ± 1 mm
210 mm (minimum)
Standard: 8 x 3.85 dots/mm
Detail: 8 x 7.7 dots/mm
Fine: 8 x 15.4 dots/mm
FAX220 - 15 s (Measured using a CCITT #1 test chart,
Slerexe Letter, at 9,600 bps, MH coding with EFC,
10 ms/line I/O rate, standard resolution)
FAX240 - 11 s (Measured using a CCITT #1 test chart,
Slerexe Letter, at 9,600 bps, MMR coding with ECM, 10
ms/line I/O rate, standard resolution)
MH, EFC, SSC, MR, MMR*
128 kbytes (9 CCITT #1 test charts can be stored.)
V29, V27ter, V21
9600/7200/4800/2400 bps (Automatic fallback)
CCITT T.30 standard (NET 30)
Thermal printing
216 mm x 50 m roll
355 x 454 x 203 mm
4.6 kg
H501-50, 51, 52, 53, 54, H502-50, 51, 52, 53, 54:
220 - 240 Vac, 50 Hz single phase
H501-55, H502-55: 120 Vac, 50/60 Hz, single phase
17 - 28 °C
Temperature:
Humidity: 30 - 85 %RH
1-1
(*: FAX240 only)