Compaq 247320-003 - Deskpro 4000 - 5166 Model 2500/CDS Reference Manual page 181

Message
The Ultra ATA Integrity
Monitor has detected an
excessive number of data
transmission errors
between hard drive(s) xx
and the processor.
Error Number: 1736-199
Disk Controller: xx
Hard Drive xx
Model: xx
Capacity: xx MB
Serial Number: xx
Firmware Revision: xx
System Serial Number: xx
NOTE: Dynamically
determined fields are
represented by xx.
Message
An excessive number of
correctable memory errors
has been detected on the
system.
Socket Number : xx
Serial Number : xx
Memory Type : xx
Memory Size : xx MB
Recommended Actions
1. Contact your System Administrator
2. Move non-Ultra ATA devices to the secondary controller.
3. If errors persist, replace the standard 40-conductor IDE cable with an
80-conductor Ultra ATA cable. Contact your Compaq Authorized
Reseller.
Recommended Actions
1. Make note of the memory module information provided below if
present.
2. Save open files and exit all applications.
3. Exit Windows.
4. Turn the system off, then turn it back on.
5. Have your System Administrator run the F10 Diagnostics 'RAM Long
Test' if you are still experiencing problems.