5. Press down on the release latch
the bezel and swing the bezel out from the left.
6. Press down on the release latch
the bezel and swing the bezel out from the right to remove
the bezel.
To replace the front bezel, complete the following steps:
1. Line up the release latches at the top of the bezel with the
appropriate slots in the front of the chassis.
Be sure to line up the diskette drive eject button with the
corresponding hole in the front bezel before snapping the
bezel in place.
2. Swing the bezel down and press in to secure the lower
release latches.
at the lower left edge of
at the lower right edge of