Compaq 247320-003 - Deskpro 4000 - 5166 Model 2500/CDS Reference Manual page 165

6. Select one of the following from the test option menu:
Quick Check Diagnostics—This option runs a quick,
general test on each device with a minimal number of
prompts. If errors occur, they are displayed when the
testing is complete.
Automatic Diagnostics—This option runs unattended,
maximum testing of each device with minimal
prompts. You can choose how many times to run the
tests, to stop on errors, or to print or file a log of errors.
Prompted Diagnostics—This option allows maximum
control over the device testing process. You can
choose attended or unattended testing, decide to stop
on errors, or choose to print or file a log of errors.
7. Follow the instructions on the screen as the diagnostic tests
are run on the devices. When the testing is complete, the
screen displays the test option menu again.
When running TEST, record any error message numbers
and have them available when you contact your Compaq
authorized dealer, reseller, or service provider for
assistance.
8. Exit to the Compaq Utilities menu.
Use View System Information (INSPECT) in the following
instances:
To view information about the system once it has been
configured.
To save, print, or display the information generated by
INSPECT. It is recommended that you run INSPECT and
have the printed report available before placing a call to the
Compaq Customer Support Center.
To assist your Compaq authorized dealer, reseller, or service
provider in analyzing the system by allowing the service
provider to reproduce the same environment on another
computer for testing.