Compaq 247320-003 - Deskpro 4000 - 5166 Model 2500/CDS Reference Manual page 50

Remote Security Management allows the system administrator
to safely set or modify security features on remote Compaq
Deskpros, directly from the centralized network management
console. Enabling the system administrator to perform these
tasks remotely, on multiple computers, results in consistent
deployment of and greater control over Deskpro security
parameters over the network. It also results in greater
productivity and lower total cost of ownership.
Use of Remote Security Management requires an
established setup password.
Remote Security Management is performed in two stages:
1. System administrator uses the Remote Management Setup
software on a centralized management console to define the
security parameters.
2. System administrator uses a PC LAN management product
to distribute the settings over the network to remote
Compaq Deskpro personal computers.
For more information about the Remote Management Setup
software and enabling Remote Security Management, refer to
the online Remote Management Administrators Guide. The
Remote Management Administrators Guide is included with the
Remote Management Administration Tools, and is available on
the Support Software CD for Compaq Desktop, Portable, and
Workstation Products or at the Compaq Web Site at
http://www.compaq.com.
Remote Wakeup and Remote Shutdown allow a system
administrator to power on and power off a client computer from
a remote location, supported by PC LAN management tools.
This enables cost-effective power consumption when the
administrator needs to distribute software or update ROM.