Compaq 247320-003 - Deskpro 4000 - 5166 Model 2500/CDS Reference Manual page 51

Remote Wakeup allows the network interface controller
to continue functioning, even when power to the
computer has been turned off; however, the computer
continues to consume electricity. Only when you
disconnect the power cord from the electrical outlet does
the computer stop consuming electricity.
To enable Remote Wakeup, complete the following steps:
1. Double-click the Network icon, located in the Control
Panel.
2. Double-click the Compaq Netelligent 10/100 TX
Embedded UTP Controller.
3. Select the Advanced Properties tab.
4. Select Remote Wakeup.
5. Change the value to ON.
6. Exit the Network control application.
For more information on using Remote Wakeup and Remote
Shutdown, refer to the online Remote Management
Administrators Guide. The Remote Management Administrators
Guide is included with the Remote Management Administration
Tools, and is available on the Support Software CD for Compaq
Desktop, Portable, and Workstation Products or at the Compaq
Web Site at http://www.compaq.com.
Third-party software tools may be required to remotely
distribute software.
The Replicated Setup feature gives an administrator the ability
to easily copy one Deskpro Setup configuration to other
Deskpro computers of the same model. This allows for faster,
more consistent configuration of multiple Deskpro computers.