!
!
3. Open the computer by removing its outside cover and front
bezel. Refer to the sections "Removing the Computer
Cover" and "Removing the Front Bezel" in this chapter for
instructions.
4. Install any optional equipment (ISA or PCI expansion
board, processor upgrade, memory, drive). Refer to the
applicable sections or the documentation that comes with
the optional equipment for instructions.
5. Replace the front bezel and computer cover.
6. Turn on the monitor, computer, and any devices you want
to test.
7. Reconfigure the computer, if necessary. Refer to Chapter 8,
"Using Compaq Utilities," for instructions.
8. If you normally lock the Smart Cover Lock, use Computer
Setup to relock the lock.
9. Test the computer (optional) using the TEST utility.