Compaq 247320-003 - Deskpro 4000 - 5166 Model 2500/CDS Reference Manual page 164

Use Computer Checkup (TEST) in the following instances:
To determine if all devices are recognized by the system and
functioning properly. Running TEST is optional, but
recommended, after you install or connect a new device.
To save, print, or display the information generated by
TEST. It is recommended that you run TEST and have the
printed report available before placing a call to the Compaq
Customer Support Center.
To assist your Compaq authorized dealer, reseller, or service
provider in analyzing the system by allowing the service
provider to reproduce the same environment on another
computer for testing.
To run Computer Checkup (TEST), complete the following
steps:
1. Turn on only the external devices that you wish to test. You
may wish to leave the printer connected to log error
messages.
2. Access the Compaq Utilities menu.
3. From the Compaq Utilities menu, select Computer
Checkup (TEST).
4. When the test option menu appears, select the option to
view the device list.
5. Verify that TEST correctly detected the devices installed.
This utility will detect all devices manufactured by
Compaq; devices from other manufacturers may not be
detected.
If the list is correct, select OK and go on to step 6.
If the list is incorrect, be sure that any new devices are
installed properly. If you do not find an installation
problem, call your Compaq authorized dealer, reseller,
or service provider.