Compaq 247320-003 - Deskpro 4000 - 5166 Model 2500/CDS Reference Manual page 61

7. Select the monitor Manufacturer and Model.
If your monitor does not appear in the list, proceed to steps
9 and 10.
8. Click OK.
9. Click Have Disk if your monitor does not appear in the list
above, and you wish to install your monitor using an
installation disk provided with your monitor.
10. Insert the manufacturer's installation disk into drive A and
click the OK button.
To display driver information, click the Compaq tab,
located in Display Properties.
Use the MGA Panel to select a monitor type, configure 3D
accelerations, and obtain information about the Matrox graphics
controller installed in your computer.
To access the MGA Panel, double-click the MGA Panel icon,
located in the Windows Control Panel.
Access the Monitor tab to select a monitor. Complete the
following steps:
1. Click the Monitor tab in the MGA Panel.
2. If you have multiple graphics controllers or monitors
installed, choose the Millennium-II board ID first, at the
upper-right corner of the page.
3. Select the monitor controlled by the Millennium-II
graphics controller.
4. Perform this procedure for each graphics controller that
you have installed.
5. Click Save and restart your computer when prompted to do
so.