Compaq 247320-003 - Deskpro 4000 - 5166 Model 2500/CDS Reference Manual page 116

7. Connect the drive power
Refer to the "Using the Cable-Select Feature" section of
this chapter for more information.
8. Push the drive cage back into the computer chassis and
secure it with the two screws through the front of the
chassis.
9. Remove the blank drive bezel from the inside of the front
bezel, if necessary.
10. Replace the front bezel and computer cover.
11. Reconfigure the computer, if necessary. Refer to Chapter 8,
"Using Compaq Utilities," for more information.
If you have installed a second diskette drive (B:), you will
need to reconfigure the computer, using Computer Setup,
to recognize the B: drive. Choose the Storage option,
under Built-in Devices, to reconfigure the drive.
12. If you normally lock the Smart Cover Lock, use Computer
Setup to relock the lock.
and signal cables.