Event Identifiers 1343-4613 - HP 108164-003 - ProLiant - 800 Reference Manual

Event identifier: cpqstmsg.dll - 1283 (Hex)0x84350503 (Service Event)
Log Severity: Warning (2)
Log Message: Could not read the registry subkey: "%1". This error can be caused by a corrupt
registry or a low memory condition. Rebooting the server may correct this error.
Event identifier: cpqstmsg.dll - 1284 (Hex)0x84350504 (Service Event)
Log Severity: Warning (2)
Log Message: Could not write the registry subkey: "%1". This error can be caused by a corrupt
registry or a low memory condition. Rebooting the server may correct this error.
Event identifier: cpqstmsg.dll - 1285 (Hex)0x84350505 (Service Event)
Log Severity: Warning (2)
Log Message: Could not write the registry subkey: "%1". This error can be caused by a corrupt
registry or a low memory condition. Rebooting the server may correct this error.
Event identifier: cpqstmsg.dll - 1294 (Hex)0x8435050e (Service Event)
Log Severity: Warning (2)
Log Message: Unsupported storage system. The ProLiant storage system %1 is unsupported by this
version of the Storage Agents. Upgrade the agents to the latest version.

Event Identifiers 1343-4613

Event identifier: cpqstmsg.dll - 1343 (Hex)0x8435053f (Service Event)
Log Severity: Warning (2)
Log Message: Duplicate SCSI port found in slot %1. The current system ROM may not support this
SCSI controller. You may need to update your system ROM.
Event identifier: cpqstmsg.dll - 1344 (Hex)0x84350540 (Service Event)
Log Severity: Warning (2)
Log Message: A version mismatch has been detected with the SCSI device monitor driver
(CPQSDM.SYS). The current driver version is %1. Cause: You may not have rebooted after a Storage
Agents upgrade. Always reboot the system after installing agents.
Event identifier: cpqstmsg.dll – 1346 (Hex) 0x84350540 (Service Event)
Log Severity: Warning (2)
Log Message: The SCSI controller on port %1 has been omitted. The SCSI Agent could not get the slot
data for the controller.
Event identifier: cpqstmsg.dll - 1792 (Hex)0x84350700 (Service Event)
Log Severity: Warning (2)
Log Message: The SNMP Agent is unable to generate traps due to an error during initialization.
Cause: Check to Be sure that the SNMP service is running. Reinstalling the agents may fix this error.
Event identifier: cpqstmsg.dll - 1795 (Hex)0x84350703 (Service Event)
Log Severity: Warning (2)
Storage agents 77