HP 108164-003 - ProLiant - 800 Reference Manual page 97

Supporting SNMP Trap Data:
•
sysName
•
cpqHoTrapFlags
Supporting SNMP Trap Description: "Errors occurred during server restart."
NT Event ID: 1124 (Hex)0x84350464 (cpqsvmsg.dll)
Log Severity: Warning (2)
Log Message: The Fault Tolerant Power Supply Sub-system is in a degraded state. Restore power or
replace the failed power supply.
SNMP Trap: cpqHe4FltTolPowerSupplyDegraded - 6049 in CPQHLTH.MIB
Symptom: The fault tolerant power supply condition has been set to degraded for the specified chassis
and bay location.
Supporting SNMP Trap Data:
•
sysName
•
cpqHoTrapFlags
•
cpqHeFltTolPowerSupplyChassis
•
cpqHeFltTolPowerSupplyBay
•
cpqHeFltTolPowerSupplyStatus
•
cpqHeFltTolPowerSupplyModel
•
cpqHeFltTolPowerSupplySerialNumber
•
cpqHeFltTolPowerSupplyAutoRev
•
cpqHeFltTolPowerSupplyFirmwareRev
•
cpqHeFltTolPowerSupplySparePartNum
•
cpqSiServerSystemId
Supporting SNMP Trap Description: "The Power Supply is Degraded on Chassis
[cpqHeFltTolPowerSupplyChassis], Bay [cpqHeFltTolPowerSupplyBay], Status
[cpqHeFltTolPowerSupplyStatus], Model [cpqHeFltTolPowerSupplyModel], Serial Num
[cpqHeFltTolPowerSupplySerialNumber], Firmware [cpqHeFltTolPowerSupplyFirmwareRev]."
NT Event ID: 1125 (Hex)0xc4350465 (cpqsvmsg.dll)
Log Severity: Error (3)
Log Message: The Fault Tolerant Power Supply Sub-system is in a failed state. Restore power or
replace the failed power supply.
SNMP Trap: cpqHe4FltTolPowerSupplyFailed - 6050 in CPQHLTH.MIB
Symptom: The fault tolerant power supply condition has been set to failed for the specified chassis
and bay location.
Supporting SNMP Trap Data:
•
sysName
•
cpqHoTrapFlags
•
cpqHeFltTolPowerSupplyChassis
•
cpqHeFltTolPowerSupplyBay
•
cpqHeFltTolPowerSupplyStatus
•
cpqHeFltTolPowerSupplyModel
Server agents 97