Table of Contents
Advertisement
Log Message: The SNMP Agent is older than other components. The SNMP Agent is older than the
other components of the Storage Agents. Reinstall the entire Storage Agents package to correct this
error.
Event identifier: cpqstmsg.dll - 1796 (Hex)0x84350704 (Service Event)
Log Severity: Warning (2)
Log Message: The %1 Agent is older than other components. The %1 Agent is older than the other
components of the Storage Agents. Reinstall the entire Storage Agents package to correct this error.
Event identifier: cpqstmsg.dll - 1800 (Hex)0x84350708 (Service Event)
Log Severity: Warning (2)
Log Message: Unable to read security configuration information. SNMP sets have been disabled.
Cause: This can be cause by an invalid or missing configuration or by a corrupt registry. Reinstalling
the Storage Agents may correct this problem.
Event identifier: cpqstmsg.dll - 1803 (Hex)0xc435070b (Service Event)
Log Severity: Error (3)
Log Message: Unable to load a required library. This error can be caused by a corrupt or missing
file. Reinstalling the Storage Agents or running the Emergency Repair procedure may correct this
error.
Event identifier: cpqstmsg.dll - 1804 (Hex)0x8435070c (Service Event)
Log Severity: Warning (2)
Log Message: The Storage SNMP Agent was unable to forward an SNMP trap to the Remote Insight
Board trap due to processing error. The data contains the error code.
Event identifier: cpqstmsg.dll - 1806 (Hex)0x8435070e (Service Event)
Log Severity: Warning (2)
Log Message: The Storage Agent service is not running. The SNMP Agent has determined that the
Storage Agent service is not running. Stop the SNMP service and restart the Storage Agents service. If
the error persists, reinstalling the Storage Agents may correct this error.
Event identifier: cpqstmsg.dll - 1807 (Hex)0x4435070f (Service Event)
Log Severity: Information (1)
Log Message: The Storage SNMP Agent has determined the Storage Agents service is running.
Event identifier: cpqstmsg.dll - 1808 (Hex)0x44350710 (Service Event)
Log Severity: Information (1)
Log Message: The agent could not deliver trap %1. The agent was unable to use Asynchronous
Management to deliver a trap. This can be caused by a failure in the Remote Access Service or by a
missing or invalid configuration. Use the HP Insight Management Agents control panel to verify the
Asynchronous Management configuration settings. Use the Network control panel to verify the Remote
Access configuration. If this error persists, reinstalling the Storage Agents or the Remote Access
Service may correct this error. For more information, see the Insight Asynchronous Management
documentation.
Event identifier: cpqstmsg.dll - 3584 (Hex)0x84350e00 (Service Event)
Log Severity: Warning (2)
Storage agents 78
Advertisement
Table of Contents
