Table of Contents
Advertisement
Log Severity: Warning (2)
Log Message: The %1 Agent is older than other components. The %1 Agent is older than the other
components of the Server Agents. Reinstall the entire Server Agents package to correct this error.
Event identifier: cpqsvmsg.dll - 1800 (Hex)0x84350708 (Service Event)
Log Severity: Warning (2)
Log Message: Unable to read security configuration information. SNMP sets have been disabled.
Event identifier: cpqsvmsg.dll - 1803 (Hex)0xc435070b (Service Event)
Log Severity: Error (3)
Log Message: Unable to load a required library. This error can be caused by a corrupt or missing
file. Reinstalling the Server Agents or running the Emergency Repair procedure may correct this error.
Event identifier: cpqsvmsg.dll - 1806 (Hex)0x8435070e (Service Event)
Log Severity: Warning (2)
Log Message: The Server Agent service is not running. The Server SNMP Agent has determined that
the Server Agent service is not running. Stop the SNMP service and restart the Server Agents service.
If the error persists, reinstalling the Server Agents may correct this error.
Event identifier: cpqsvmsg.dll - 1808 (Hex)0x44350710 (Service Event)
Log Severity: Information (1)
Log Message: The agent could not deliver trap %1. The agent was unable to use Asynchronous
Management to deliver a trap. This can be caused by a failure in the Remote Access Service or by a
missing or invalid configuration. Use the Management Agent control panel to verify the Asynchronous
Management configuration settings. Use the Network control panel to verify the Remote Access
configuration. If this error persists, reinstalling the Server Agents or the Remote Access Service may
correct this error. For more information, see the Asynchronous Management documentation.
Event identifier: cpqsvmsg.dll - 3328 (Hex)0x84350d00 (Service Event)
Log Severity: Warning (2)
Log Message: Unable to allocate memory. This indicates a low memory condition. Rebooting the
system may correct this error.
Event identifier: cpqsvmsg.dll - 3329 (Hex)0x84350d01 (Service Event)
Log Severity: Warning (2)
Log Message: Could not read from the registry sub-key. This error can be caused by a corrupt registry
or a low memory condition. Rebooting the server may correct this error.
Event identifier: cpqsvmsg.dll - 3330 (Hex)0x84350d02 (Service Event)
Log Severity: Warning (2)
Log Message: Could not write the registry sub-key: "%1". This error can be caused by a corrupt
registry or a low memory condition. Rebooting the server may correct this error.
Event identifier: cpqsvmsg.dll - 3331 (Hex)0x84350d03 (Service Event)
Log Severity: Warning (2)
Log Message: Could not read the registry sub-key: "%1". This error can be caused by a corrupt
registry or a low memory condition. Rebooting the server may correct this error.
Server agents 125
Advertisement
Table of Contents
