HP 108164-003 - ProLiant - 800 Reference Manual page 76

•
cpqSasHbaHwLocation
•
cpqSasPhyDrvLocationString
•
cpqSasPhyDrvHbaIndex
•
cpqSasPhyDrvIndex
•
cpqSasPhyDrvStatus
•
cpqSasPhyDrvType
•
cpqSasPhyDrvModel
•
cpqSasPhyDrvFWRev
•
cpqSasPhyDrvSerialNumber
•
cpqSasPhyDrvSasAddress
Supporting SNMP Trap Description: "Status is now [cpqSasPhyDrvStatus]."
NT Event ID: 1222 (Hex)0x843504c6 (cpqstmsg.dll)
Log Severity: Warning (2)
Event Title: SAS/SATA Logical Drive Status Change.
Log Message: Logical drive number %5 on the HBA in %4 has a new status of %6.
SNMP Trap: cpqSasLogDrvStatusChange - 5023 in CPQSCSI.MIB
Symptom: Logical Drive Status Change. The Storage Agent has detected a change in the status of a
SAS or SATA logical drive. The current logical drive status is indicated in the cpqSasLogDrvStatus
variable.
Supporting SNMP Trap Data:
•
sysName
•
cpqHoTrapFlags
•
cpqSasHbaHwLocation
•
cpqSasLogDrvHbaIndex
•
cpqSasLogDrvIndex
•
cpqSasLogDrvStatus
•
cpqSasLogDrvOsName
Supporting SNMP Trap Description: "Status is now [cpqSasLogDrvStatus]."
Event identifier: cpqstmsg.dll - 1280 (Hex)0x84350500 (Service Event)
Log Severity: Warning (2)
Log Message: Unable to allocate memory. This indicates a low memory condition. Rebooting the
system will correct this error.
Event identifier: cpqstmsg.dll - 1281 (Hex)0x84350501 (Service Event)
Log Severity: Warning (2)
Log Message: Could not read from the registry subkey. This error can be caused by a corrupt registry
or a low memory condition. Rebooting the server may correct this error.
Event identifier: cpqstmsg.dll - 1282 (Hex)0x84350502 (Service Event)
Log Severity: Warning (2)
Log Message: Could not write the registry subkey: "%1". This error can be caused by a corrupt
registry or a low memory condition. Rebooting the server may correct this error.
Storage agents 76