HP 108164-003 - ProLiant - 800 Reference Manual page 56

NT Event ID: 1184 (Hex)0x843504a0 (cpqstmsg.dll)
Log Severity: Warning (2)
Event Title: Drive Array Tape Drive Replace Cleaning Tape.
Log Message: The cleaning tape in the tape drive in slot %4, SCSI bus %5, SCSI target %6 needs to
be replaced.
SNMP Trap: cpqDaTapeDriveCleanTapeReplace - 3024 in CPQIDA.MIB
Symptom: Tape Drive Cleaning Tape Needs Replacing. The agent has detected that an autoloader
tape unit has a cleaning tape that has been fully used and therefore needs to be replaced with a new
cleaning tape.
Supporting SNMP Trap Data:
•
sysName
•
cpqHoTrapFlags
•
cpqDaTapeDrvCntlrIndex
•
cpqDaTapeDrvBusIndex
•
cpqDaTapeDrvScsiIdIndex
•
cpqDaTapeDrvLunIndex
Supporting SNMP Trap Description: "Cleaning tape needs replacing."
NT Event ID: 1185 (Hex)0x843504a1 (cpqstmsg.dll)
Log Severity: Warning (2)
Event Title: Fibre Channel Controller Status Change.
Log Message: The Fibre Channel Controller in slot %4 has a new status of %5.
SNMP Trap: cpqFca2HostCntlrStatusChange - 16021 in CPQFCA.MIB
Symptom: Fibre Channel Host Controller Status Change. This trap indicates that the agent has
detected a change in the status of a Fibre Channel Host Controller. The variable
cpqFcaHostCntlrStatus indicates the current controller status.
User Action: If the controller status is failed, replace the controller.
Supporting SNMP Trap Data:
•
sysName
•
cpqHoTrapFlags
•
cpqFcaHostCntlrSlot
•
cpqFcaHostCntlrStatus
•
cpqFcaHostCntlrModel
•
cpqFcaHostCntlrWorldWideName
Supporting SNMP Trap Description: "Host controller in slot [cpqFcaHostCntlrSlot] has a new status of
[cpqFcaHostCntlrStatus]."
NT Event ID: 1186 (Hex)0x843504a2 (cpqstmsg.dll)
Log Severity: Warning (2)
Event Title: IDE ATA Disk Status Change.
Log Message: The ATA disk drive with model %6 and serial number %7 has a new status of %2.
Storage agents 56