Download Print this page

HP 108164-003 - ProLiant - 800 Reference Manual Page 123

Microsoft windows event id and snmp traps reference guide for use with smartstart version 8.25.
Hide thumbs

Advertisement

User action: None
Supporting SNMP Trap Data:
sysName
cpqHoTrapFlags
Supporting SNMP Trap Description: "The Management processor is ready after a successfull reset"
NT Event ID: 1181 (Hex) 0x8435049D (cpqsvmsg.dll)
Log Severity: Warning (3)
Log Message: The Management Processor has not reset successfully and is not operational. The data
contains the error code.
SNMP Trap: cpqHeManagementProcFailedReset - 6063 in CPQHLTH.MIB
Symptom: The Management processor failed reset. The management processor was not successfully
reset and is not operational.
User action: Reset the management procesessor again or re-flash the management processor
firmware.
Supporting SNMP Trap Data:
sysName
cpqHoTrapFlags
Supporting SNMP Trap Description: The Management processor failed reset.
NT Event ID: 1182 (Hex)0x4435049EL
Log Severity: Informational
Log Message: USB storage device '%5' attached. The data contains the error code.
SNMP Trap: 1008 in CPQSTDEQ.MIB
Symptom: The USB key is attached to the server.
User Action: None required.
Supporting SNMP Trap Data:
sysName,
cpqHoTrapFlags
cpqSeUSBDeviceType
cpqSeUSBDeviceName
Supporting SNMP Trap Description: This trap is sent when a USB storage device has been attached.
Symbolic Name: CPQ_STD_USB_DEV_ATTACHED
NT Event ID: 1183 (Hex)0x4435049FL
Log Severity: Informational
Log Message: USB storage device '%5' removed. The data contains the error code.
SNMP TRAP: 1009 in CPQSTDEQ.MIB
Symptom: The USB key has been removed from the server.
User Action: None required.
Supporting SNMP Trap Data:
Server agents 123

Advertisement

   Related Manuals for HP 108164-003 - ProLiant - 800

This manual also for:

124708-001 - proliant cluster - 1850 179740-001 - proliant - 3000 1850r - proliant - 128 mb ram 195294-001 - proliant - ml370r 219700-001 - proliant - 1500 221050-001 - proliant - 5000r... Show all

Comments to this Manuals

Symbols: 0
Latest comments: