Turning On The Printer - Dell 2150CN User Manual

1 Ethernet port
To connect the printer to the network, connect one end of an Ethernet cable into
the Ethernet port on the rear of the printer, and the other end to a LAN drop or
hub. To setup a wireless connection, insert the wireless adapter into the wireless
adapter socket on the back of the printer.
For a wireless connection, see "Installing the Optional Wireless Adapter."
NOTE:
To use the wireless adapter, be sure to disconnect the network cable.

Turning on the Printer

CAUTION:
CAUTION:
Supply) system.
1 Connect the power cable to the power connector on the rear of the printer,
and then to a power source.
2 Turn on the printer. When the printer is connected via a USB cable, the USB
driver is automatically installed.
82
Connecting Your Printer
Do not use extension cords or power strips.
The printer should not be plugged into a UPS (Uninterruptible Power