Dell 2150CN User Manual page 456

admin\Desktop\0630_UG??\Mioga_SFP_UG_FM\Mioga_SFP_UG_FM\section28.fm
Action
1 Verify that the correct print media is being used.
See "Supported Paper Types." If not, use the print
media recommended for the printer.
Does this solve your problem?
2a Check the wrinkle. Is the wrinkle within 30 mm of
the four edges of the envelope?
2b Execute the Paper Wrinkle Check Mode.
Launch the Tool Box, and click Paper
a
Wrinkle Check Mode on the Diagnosis tab.
Click the Start button.
b
Is the paper wrinkled?
3a Load the envelopes in the standard 250-sheet tray
in the short edge feed orientation with the flap
closed and print side up. For details, see
"Loading Envelopes in the Standard 250-Sheet
Tray and Optional 250-Sheet Feeder."
Does this solve your problem?
3b Load the envelopes in the standard 250-sheet tray
in the long edge feed orientation with the flap
open and print side up. For details, see "Monarch
or DL."
Does this solve your problem?
D E L L C O N F I D E N T I A L – P R E L I M I N A RY 9 / 1 3 / 1 0 - F O R P R O O F O N LY
454
Troubleshooting Guide
FILE LOCATION: C:\Users\fxstdpc-
Yes No
The task is If printing on an
complete. envelope, go to
action 2a.
If printing on
print media
other than
envelopes, go
to action 2b.
This type of If the envelope
wrinkle is is 220 mm or
considered longer (C5 or
normal. Your Envelope #10),
printer is not at go to action 3a.
fault.
If the envelope
is shorter than
220 mm
(Monarch or
DL), go to
action 3a or 3b.
Contact Dell. Contact Dell to
replace fuser.
The task is Contact Dell.
complete.
The task is Contact Dell.
complete.