Dell 2150CN User Manual page 463

admin\Desktop\0630_UG??\Mioga_SFP_UG_FM\Mioga_SFP_UG_FM\section28.fm
Action
1 Ensure that the SSF is properly inserted.
Does this solve your problem?
2a Use thick paper that is 216 g/m
Does this solve your problem?
2b Use thin paper that is 60 g/m
Does this solve your problem?
2c Load coated paper one sheet at a time.
Does this solve your problem?
2d Ensure that the envelope is properly loaded in the
SSF as instructed in "Loading an Envelope in the
SSF."
Does this solve your problem?
2e Ensure that the print media is not curled.
Does this solve your problem?
D E L L C O N F I D E N T I A L – P R E L I M I N A RY 9 / 1 3 / 1 0 - F O R P R O O F O N LY
FILE LOCATION: C:\Users\fxstdpc-
2
or less.
2
or more.
Yes
The task is
complete.
The task is
complete.
The task is
complete.
The task is
complete.
The task is
complete.
The task is
complete.
Troubleshooting Guide
No
Proceed to the
action
corresponding
to the type of
the print media
being used:
• Thick - 2a
• Thin - 2b
• Coated - 2c
• Envelope -
2d
If performing
manual duplex
printing, go to
action 2e.
If using paper
other than the
above or if not
performing
manual duplex
printing, go to
action 2f.
Go to action 3a.
Go to action 3a.
Go to action 3b.
Go to action 3c.
Go to action 3a.
461