Dell 2150CN User Manual page 64

2 Select the printer, and then click the Next button.
Wireless Network Settings screen appears.
NOTE:
click Enter IP Address button and enter the IP address of your printer, and
then click the OK button.
3 Set the wireless network settings, and then click the Next button.
IP Address Settings screen appears.
NOTE:
4 Set the IP address of the printer, and then click the Next button.
Confirm the settings screen appears.
5 Confirm the settings, and then click the Apply button.
Complete configuration screen appears.
6 Click the Next button.
For WPS-PIN, WPS-PBC, Operator Panel, and Dell Printer Configuration
Web Tool, follow the on-screen instructions to configure wireless settings.
To configure wireless settings without using the video instructions, follow the
following instructions.
WPS-PIN
The PIN code of WPS-PIN can only be configured from the operator panel.
NOTE:
WPS-PIN (Wi-Fi Protected setup-Personal Identification Number) is a
method to authenticate and register devices required for wireless configuration, by
entering PIN assignments to a printer and computer. This setting, performed
through access point, is available only when the access points of your wireless
router supports WPS.
1 Press the
2 Press button until Admin Menu appears, and then press the
button.
3 Press button until Network appears, and then press the
button.
4 Press button until Wireless Setup appears, and then press the
(Set) button.
62
Installing Optional Accessories
If the printer cannot detect your printer and your printer is not listed,
For details on each item, see "Assigning an IP Address."
(Menu) button.
(Set)
(Set)