Dell 2150CN User Manual page 65

5 Ensure that WPS is displayed, and then press the
6 Press button until PIN Code appears, and then press the
button.
7 Write down the 8-digit PIN code displayed on the panel or press
until Print PIN Code appears, and then press the
The PIN code is printed.
8 Ensure that Start Config. is displayed, and then press the
button.
9 Ensure that the message Please wait Wireless Setting is
displayed, and enter the PIN code displayed on the step 7 into the wireless
LAN access point (Registrar).
NOTE:
manual supplied with the wireless LAN access point.
10 When the WPS operation is successful and the printer is rebooted, wireless
LAN connection setting is completed.
WPS-PBC
You can start Push Button Control only from the operator panel.
NOTE:
WPS-PBC (Wi-Fi Protected Setup-Push Button Configuration) is a
method to authenticate and register devices required for wireless configuration, by
pressing the button provided on the access point via wireless routers, and then
performing WPS-PBC setting on the operator panel. This setting is available only
when the access point supports WPS.
1 Press the
2 Press button until Admin Menu appears, and then press the
button.
3 Press button until Network appears, and then press the
button.
4 Press button until Wireless Setup appears, and then press the
(Set) button.
5 Ensure that WPS is displayed, and then press the
6 Ensure that Push Btn. Ctrl is displayed, and then press the
button.
For WPS operation on the wireless LAN access point, refer to the
(Menu) button.
(Set) button.
(Set) button.
Installing Optional Accessories
(Set)
button
(Set) button.
(Set)
(Set)
(Set)
(Set)
63