Dell 2150CN User Manual page 168

Power Saver Time - Sleep
Power Saver Time - Deep Sleep
Auto Reset
Fault Time-Out
Job Time-Out
Control Panel Tone
Invalid Key Tone
Machine Ready Tone
Job Completed Tone
Fault Tone
Alert Tone
Out of Paper Tone
Low Toner Alert Tone
Auto Clear Alert Tone
All Tones
166
Dell Printer Configuration Web Tool
Sets the time taken by the printer to enter Sleep
mode after it finishes a job.
Sets the time taken by the printer to enter Deep
Sleep mode after it has entered Sleep mode.
Sets the amount of time before the printer
automatically resets the settings on the operator
panel to the defaults when no additional settings are
made.
Sets the amount of time the printer waits before
canceling a job that stops abnormally.
Sets the amount of time the printer waits for data to
arrive from the computer.
Sets the volume of the tone that is emitted when the
operator panel input is correct, or disables the tone.
Sets the volume of the tone that is emitted when the
operator panel input is incorrect, or disables the
tone.
Sets the volume of the tone that is emitted when the
printer becomes ready, or disables the tone.
Sets the volume of the tone that is emitted when a
job is complete, or disables the tone.
Sets the volume of the tone that is emitted when a
job ends abnormally, or disables the tone.
Sets the volume of the tone that is emitted when a
problem occurs, or disables the tone.
Sets the volume of the tone that is emitted when the
printer runs out of paper, or disables the tone.
Sets the volume of the tone that is emitted when the
toner is low, or disables the tone.
Sets the volume of the tone that is emitted 5 seconds
before the printer performs auto clear, or disables
the tone.
Sets the volume of all the alert tones, or disables all
the tones.