Performing Auto Correct - Dell 2150CN User Manual

Manual Color Registration Adjustments are required when the printer is initially
installed and after the printer is moved.
NOTE:
The
Reg Adjust
Values:
Auto Correct
ColorReg
Chart
Enter Number Enter (LY,
NOTE:
Ensure that you remove the paper from the single sheet feeder before
performing
Clean Developer
Purpose:
To stir the toner in a new toner cartridge.
Values:
Are You Sure?
314
Understanding the Printer Menus
Color Reg Adjust
is set to Off
Are You Sure?
Are You Sure?
-9 to +9 Sets lateral (perpendicular to paper feed
LM, LC)
Enter (RY, -9 to +9
RM, RC)
Enter (PY, -9 to +9
PM, PC)
Auto Correct
Press the (Set) button to stir the toner in a new toner cartridge.
feature can be configured when
.
Press the (Set) button to automatically
perform color registration correction.
Press the (Set) button to print a color
registration chart. The color registration chart
prints a lattice pattern of yellow, magenta, and
cyan lines. On the chart, find the values on the
right side that are next to the line that is
perfectly straight for each of the three colors. If
the value for the this line is 0, color registration
adjustment is not required. If the value for this
line is any value other than 0, specify the
adjustment values.
direction) and process (paper feed direction)
color adjustment values individually for
Yellow, Magenta, and Cyan. Enter a number in
order of lateral adjustment (left), lateral
adjustment (right), and process adjustment.
Press the (Set) button to save all the settings.
.
Auto