Network - Dell 2150CN User Manual

Color Prints in the color mode.

Network

Use the Network menu to change the printer settings affecting jobs sent to the
printer through the wired or wireless network.
NOTE:
Values marked by an asterisk (*) are the factory default menu settings.
Ethernet
Purpose:
To specify the communication speed and the duplex settings of Ethernet. The
change becomes effective after the printer is turned off and then on again.
Values:
*
Auto
10BASE-T Half
10BASE-T Full
100BASE-TX Half
100BASE-TX Full
1000BASE-T Full
Wireless Status
NOTE:
Wireless Status feature is available only when the printer is connected
using the wireless network.
Purpose:
To confirm the wireless communication status.
Values:
Connection
Detects the Ethernet settings automatically.
Uses 10BASE-T Half-duplex.
Uses 10BASE-T Full-duplex.
Uses 100BASE-TX Half-duplex.
Uses 100BASE-TX Full-duplex.
Uses 1000BASE-T Full-duplex.
Good
Acceptable
Low
No Reception
Understanding the Printer Menus
293