Dell 2150CN User Manual page 186

*1
Ethernet
Port Status
*1
This item is available only when the printer is connected using LAN cable.
NOTE:
The settings in the Port Settings page will be valid only when the printer
is rebooted. When you change or configure the settings, click the Apply New
Settings button to apply the new settings.
184
Dell Printer Configuration Web Tool
Ethernet Auto
Settings
10BASE-T Half-
Duplex
10BASE-T Full-
Duplex
100BASE-TX
Half-Duplex
100BASE-TX
Full-Duplex
1000BASE-T
Full-Duplex
Current Ethernet Settings
MAC Address
LPD Sets whether to enable LPD.
Port9100 Sets whether to enable Port9100.
IPP Sets whether to enable IPP.
WSD Sets whether to enable WSD.
SMB Sets whether to enable SMB.
Bonjour Sets whether to enable Bonjour (mDNS).
(mDNS)
E-Mail Alert Sets whether to enable E-Mail Alert.
Telnet Sets whether to enable Telnet.
SNMP Sets whether to enable SNMP.
LLTD Sets whether to enable LLTD.
Detects the Ethernet
transmission rate and the duplex
settings automatically.
Selects 10Base-T Half-Duplex
as the default value.
Selects 10Base-T Full-Duplex
as the default value.
Selects 100Base-TX Half-
Duplex as the default value.
Selects 100Base-TX Full-
Duplex as the default value.
Selects 1000Base-T Full-
Duplex as the default value.
Displays the current settings of
the Ethernet.
Displays the MAC address of
the printer.