Dell 2150CN User Manual page 306

Job Completed
Fault Tone
Alert Tone
Out of Paper
Low Toner Alert Off
AutoClear Alert
All Tones
mm / inch
Purpose:
To specify the default measurement unit displayed after the numeric value on
the operator panel.
Values:
Millimeters (mm)
Inches (")
NOTE:
The default for
Country
Def. Paper Size
Purpose:
To specify the default paper size.
Values:
304
Understanding the Printer Menus
Off Does not emit a tone when a job is complete.
*
On Emits a tone when a job is complete.
Off Does not emit a tone when a job ends abnormally.
*
On Emits a tone when a job ends abnormally.
Off Does not emit a tone when a problem occurs.
*
On Emits a tone when a problem occurs.
Off Does not emit a tone when the printer runs out of paper.
*
On Emits a tone when the printer runs out of paper.
Does not emit a tone when a toner is low.
*
On Emits a tone when a toner is low.
*
Off Does not emit a tone 5 seconds before the printer performs
auto clear.
On Emits a tone 5 seconds before the printer performs auto
clear.
Off Disables all the alert tones.
*
On Sets the volume of all the alert tones at once.
*
Selects millimeter as the default measurement unit.
Selects inch as the default measurement unit.
mm/inch
and Document Size
varies depending on other settings, such as
.