Dell 2150CN User Manual page 195

Printer Name Sets the printer name up to 63 alphanumeric characters and symbol
sets. The original setting will remain valid if no input is made.
SNMP
Purpose:
To configure the detailed settings of SNMP.
Values:
SNMP
Configuration
SNMP v1/v2c
Purpose:
To edit the detailed settings of SNMP v1/v2 protocol.
To enter this page, click Edit SNMP v1/v2 Properties in the SNMP page.
Values:
Community Community
Name Name (Read
only)
Enable SNMP Select the check box to enable the SNMP v1/v2c
v1/v2c protocol.
Protocol
Edit SNMP Click to display SNMP v1/v2c page and to edit the
v1/v2c setting of SNMP v1/v2c protocol from the page.
Properties
Enable SNMP Select the check box to enable the SNMP v3
v3 Protocol protocol.
Edit SNMP v3 Click to display SNMP v3 page and to edit the
Properties setting of SNMP v3 protocol from the page.
You can click this item only when SSL
communication is enabled.
Sets the community name to access (read only) data
using up to 31 alphanumeric characters.
*1
The original setting will remain valid if no input is
made. Characters entered for community name in
the previous settings will not be displayed on the
screen. The default Read Community is public.
Dell Printer Configuration Web Tool
193