Start Your Air Conditioner-Rotary Control - Whirlpool 1188018 Use And Care Manual

Models Without Power Saver
Models With Power Saver
1. Remove clear protective film from front panel badge (on
some models).
2. Set exhaust control. See "Exhaust Control (on some
models)."
3. Select the fan speed. See "Fan Speed."
4. Select temperature. See "Temperature."
Exhaust Control (on some models)
Push the Exhaust control CLOSED for maximum continuous
cooling. Pull the Exhaust control OPEN to allow you to draw stale
or smoky air from the room.
Open—pull to exhaust room air to the outside
Closed—push to circulate room air
NOTE: The Exhaust control will function only when the Fan
Speed control is operating.
18
Start Your Air Conditioner—Rotary Control
Fan Speed
Set FAN SPEED to the desired setting. When the air conditioner
is operating at Low Cool, High Cool, or Turbo Cool, the fan
circulates air continuously.
Turbo Cool—for maximum cooling
High Cool—for normal cooling
Low Cool—for sleeping comfort
Fan Only—to move air continuously without cooling
NOTE: Fan runs on Turbo speed only.
Power Saver (on some models)—fan runs only when cooling
is needed.
Because the fan does not circulate the room air continuously,
less energy is used, but the room air is not circulated as
often. Use Power Saver when you are asleep or away from
home.
NOTE: Fan runs on Low speed only.
Models Without Power Saver
Models With Power Saver
Temperature
Turn the TEMPERATURE control to a mid-setting. Adjust the air
conditioner's performance by turning the Temperature control
clockwise for maximum cooling. For less cooling, turn the
TEMPERATURE control counterclockwise. Experiment to find the
setting that suits you best.