Starting Your Air Conditioner - Rotary Control - Whirlpool ACQ058PP0 Use & Care Manual

To raise the temperature:
Press the plus button to raise the temperature 1° until it reaches
86°F (30°C).
To lower the temperature:
Press the minus button to lower the temperature 1° until it
reaches 64°F (18°C).
To set Timer for a 1- to 24-hour delay before air conditioner
is turned off (air conditioner must be On):
1. PressTIMER. Indicatorlight on air conditionercontrolpanel
willflash.
2. Press the plus or minus button to change the delay time from
1 to 24 hours.
3. Press TIMER again or wait 10 seconds. Indicator light on air
conditioner control panel will remain on.
To set Timer to turn on air conditioner, keeping previous
settings:
1. Turnoff air conditioner.
2. Press TIMER. Indicator light on air conditioner control panel
will flash.
3. Press the plus or minus button to change delay time (1 to
24 hours).
4. Press TIMER again or wait 10 seconds. Indicator light on air
conditioner control panel will remain on.
To set Timer to turn on air conditioner, changing the
previous settings:
1. Turn on air conditioner.
2. Adjust MODE to Cool, Fan Only, or Power Saver.
3. Adjust FAN SPEED to Turbo, High or Low, or press Auto.
4. Adjust temperature between 64°F (18°(3) and 86°F (30°C).
5. Turn off air conditioner.
6. Press TIMER. Indicator light on air conditioner control panel
will flash.
7. Press the plus or minus button to change delay time (1 to
24 hours).
8, Press TIMER again or wait 10 seconds. Indicator light on air
conditioner control panel will remain on.
Starling YourAir Conditioner -
Rotary Conhol
Model 1
Wait three minutes Cooler Warmer
before restading Fan
1
Coo_
Cool
Cod
FAN SPEED TEMPERATURE
Model 2
Wait tfo_ minute_ Cooler Warmer
before restarting Fan 7 t
0nly 5_3
_h C°w
6 2
ool
Closed
I
Open
FAN SPEED TEMPERATURE
Model 3
Wait th_minutes Cooler Warmer
Co 6 2
Nigh
I
Turbo 4
Cod
FAN SPEED TEMPERATURE
1, Set exhaust control. See "Exhaust Control (on some
models)."
2. Select the fan speed. See =Fan Speed."
3. Set temperature. See "Temperature."
Exhaust Control (on some models)
1, The Exhaust control CLOSED for maximum continuous
cooling. The Exhaust control set to OPEN allows you to draw
stale or smoky air from the room.
a Open - to exhaust room air to the outside.
10