Starting Your Air Conditioner - Rotary Control - Whirlpool YACQ088XP0 Use & Care Manual

To select the fan speed (in Cool or Power Saver
mode only):
Press TURBO, HIGH or LOW.
Turbo
f-
High
FAN
SPEED
Low
\
To raise the temperature:
Press the up arrow button to raise the temperature 1° until it
reaches 86°F (30°C).
To lower the temperature:
Press the down arrow button to lower the temperature 1° until it
reaches 64°F (18°C).
Model 2
FAN
Wat til_eem_te_
_101e re_tarting
Turbo
Cool
TEMPERATURE
Cooler Warmer
1
SPEED
ran
TEMPERATURE
Cooler Warmer
1
To set Timer for a 1- to 24-hour delay until air conditioner
turns off (air conditioner must be On):
1. Press TIMER. Indicator light on air conditioner will flash.
Timer
2. Press the up arrow or down arrow button to change delay
time (1 to 24 hours).
3. Press TIMER again or wait 10 seconds. Indicator light on air
conditioner will remain on.
To set Timer to turn on air conditioner, keeping previous
settings:
1. Turn off air conditioner.
2. Press TIMER. Indicator light on air conditioner will flash.
3. Press the up arrow or down arrow button to change delay
time (1 to 24 hours).
4. Press TIMER again or wait 10 seconds. Indicator light on air
conditioner will remain on.
To set Timer to turn on air conditioner, changing the
previous settings:
1. Turn on air conditioner.
2. Adjust MODE to Auto, Cool, Fan Only, or Power Saver.
3. Adjust FAN SPEED to Turbo, High or Low.
4. Adjust temperature between 64°F (17°C) and 86°F (30°C).
5. Wait 3 seconds before turning off air conditioner.
6. Press TIMER. Indicator light on air conditioner will flash.
7. Press the up arrow or down arrow button to change delay
time (1 to 24 hours).
8. Press TIMER again or wait 10 seconds. Indicator light on air
conditioner will remain on.
Cool High
Cool
Low
Cool
1. Remove clear protective film from front panel badge (on
some models).
2. Set exhaust control. See "Exhaust Control (on some
models)."
3. Select the fan speed. See "Fan Speed."
4. Select temperature. See "Temperature."
Exhaust Control (on some models)
Push the Exhaust control CLOSED for maximum continuous
cooling. Pull the Exhaust control OPEN to allow you to draw stale
or smoky air from the room.
• Open - pull to exhaust room air to the outside
• Closed - push to circulate room air
The Exhaust control will function only when the Fan Speed
control is operating.
10