Through-The-Wall Installation - Whirlpool 1188018 Use And Care Manual

Top View
B
A
A. Side curtain against window channel
B. Window channel
C. #8 x " round-head screw
Complete Installation
1. Insert foam seal behind the top of the lower window sash and
against the glass of the upper window.
A
A. Lower window sash
B. Foam seal
2. Place window-lock bracket on top of lower window and
against upper window sash.
3. Use a " drill bit to drill a starter hole through the hole in the
bracket into the window sash.
Option 1—Wood, Metal or Plastic Molding
When you are using a wood, metal or plastic molding, the wood
frame should line up with inside wall as shown.
A B C
A. Molding
B. Inside wall
10
C
B

Through-the-Wall Installation

D
C. Wood frame
D. Louvers
4. Attach window-lock bracket to window sash with #8 x
round-head screw to secure window in place.
A
B
A. Upper window sash
B. Window-lock bracket
WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
5. Plug into a grounded 3 prong outlet.
6. Press RESET on the power supply cord plug.
Option 2—Plaster Wall With No Molding
If the plastered wall is to be flush with the cabinet and no molding
is used, the wood frame must be set
wall.
A B C
A. Plastered wall
B. Inside wall
"
" (13 mm) into the inside
D
C. Wood frame
D. Louvers