Starting Your Air Conditioner-Rotary Control; Changing Air Direction - Whirlpool ACQ102PV Use And Care Manual

4. For Fan mode, adjust fan speed to High, Med or Low.
NOTE: In Fan mode, temperature cannot be set.
5. For 6 th Sense ™ System control, adjust fan speed to High,
Med, Low or Auto.
6. For Dry mode and 6 th Sense
temperature up or down by 4ºF (2ºC).
7. Turn off air conditioner.
8. Press TIMER. Timer indicator light on the air conditioner
control panel will flash.
9. Press up or down arrow button to change the delay time from
30 minutes to 24 hours.
10. After 5 seconds, Timer indicator light on the air conditioner
control panel will remain on.
1. Select Mode. See "Mode."
2. Set temperature. See "Thermostat."
Mode
Set Mode to the desired setting. When the air conditioner is
operating, the fan circulates air continuously.
High Cool—for maximum cooling
Med Cool—for normal cooling
Low Cool—for sleeping comfort
High Fan—for maximum continuous air movement without
cooling
Med Fan—for normal continuous air movement without
cooling
Use wheel to direct the air right or left. Use the whole cartridge to direct air up, down or straight ahead.
A. Wheel
™ System control, adjust
Starting Your Air Conditioner—Rotary Control

Changing Air Direction

A
To clear Timer delay program:
NOTE: Air conditioner can be either on or off.
1. Press TIMER once after it has been programmed. Display will
show remaining time.
2. While the display is showing the remaining time, press TIMER
again. Timer indicator light will turn off.
To see or change the remaining time (in hours):
1. Press TIMER once after it has been programmed. Display will
show remaining time.
2. While the display is showing the remaining time, press the
plus or minus TEMP button to increase or decrease the time.
3. After 5 seconds, the display will show the current room
temperature.
Low Fan—for quiet continuous air movement without cooling
Thermostat
Turn the Thermostat control to a mid-setting. Adjust the air
conditioner's performance by turning the Thermostat control
clockwise for maximum cooling. For less cooling, turn the
Thermostat control counterclockwise. Experiment to find the
setting that suits you best.
A
A. Cartridge
13