Starting Your Air Conditioner-Rotary Control-Cool Only Models - Whirlpool ACE184PT0 Use And Care Manual

To Set the Timer Delay
To set Timer to turn off the air conditioner (air conditioner
must be on):
1. Press TIMER. Timer indicator light on the air conditioner
control panel will flash.
2. Press the plus or minus button to change the delay time from
1 to 24 hours.
3. Press TIMER again or wait 10 seconds. Timer indicator light
on the air conditioner control panel will remain on.
To set Timer to turn on the air conditioner, keeping
previous settings:
1. Turn off the air conditioner.
2. Press TIMER. Timer indicator light on the air conditioner
control panel will flash.
Starting Your Air Conditioner—Rotary Control—Cool Only Models
4
3 5
2
1 7
WARMER
COOLER
T E M P E R A T U R E
1. Set vent control. See "Vent Control (on some models)."
2. Select the fan speed. See "Fan Speed."
3. Set temperature. See "Temperature."
Vent Control (on some models)
Set the Vent control to CLOSE for maximum continuous cooling.
The Vent control set to OPEN allows you to draw stale or smoky
air from the room.
Open—to exhaust room air to the outside.
Close—to circulate room air.
NOTE: The Vent control will function only when the Fan Speed is
operating.
14
TIMER
Wait three minutes before restarting
LOW
COOL
FAN HIGH
ONLY COOL
TURBO
OFF
6
COOL
F A N S P E E D
AIR SWING
3. Press the plus or minus button to change delay time from 1 to
24 hours.
4. Press TIMER again or wait 10 seconds. Timer indicator light
on the air conditioner control panel will remain on.
To set Timer to turn on the air conditioner, changing the
previous settings:
1. Turn on the air conditioner.
2. Adjust the mode to Cool, Fan, or Power Saver.
3. Adjust the fan speed to Turbo, High, Low, or Auto.
4. Adjust temperature between 64°F and 86°F (18ºC and 30ºC).
5. Turn off the air conditioner.
6. Press TIMER. Timer indicator light on the air conditioner
control panel will flash.
7. Press the plus or minus button to change delay time from 1 to
24 hours.
8. Press TIMER again or wait 10 seconds. Timer indicator light
on the air conditioner control panel will remain on.
Fan Speed
Set Fan Speed to the desired setting. When the air conditioner is
operating at Turbo Cool, High Cool, or Low Cool, the fan
circulates air continuously.
Turbo Cool—for maximum cooling
High Cool—for normal to maximum cooling (depending on
model)
Low Cool—for sleeping comfort
Fan Only—to move air continuously without cooling
FAN
ONLY
OFF
Temperature
Turn the TEMPERATURE control to a mid-setting. Adjust the air
conditioner's performance by turning the Temperature control
clockwise for maximum cooling. For less cooling, turn the
TEMPERATURE control counterclockwise. Experiment to find the
setting that suits you best.
3
2
1
WARMER
LOW
COOL
HIGH
COOL
TURBO
COOL
4
5
6
7
COOLER