Position The Air Conditioner In Window - Whirlpool 1188018 Use And Care Manual

Table of Contents

Advertisement

Available languages

Available languages

Handle air conditioner gently.
Be sure your air conditioner does not fall out of the opening
during installation or removal.
Do not block the louvers on the front panel.
Do not block the louvers on the outside of the air conditioner.
WARNING
Excessive Weight Hazard
Use two or more people to move and install
air conditioner.
Failure to do so can result in back or other injury.
1. Put air conditioner on SMART-MOUNT
on bottom of air conditioner are behind and against back side
of windowsill. Lower window sash.
A
B
A. Window sash
B. Feet on bottom of air conditioner
behind back side of windowsill
2. If window sash does not close flush against rear
surface of top channel, remove air conditioner and
adjust SMART-MOUNT
®
flush against rear surface of top channel.
IMPORTANT: The tray must slope downward slightly toward
the outside to provide proper drainage for the air conditioner.
Correct Installation
A. Window sash
B. Top channel
C. Air conditioner
If your air conditioner looks like either of the illustrations in the
"Incorrect installation" graphic, SMART-MOUNT
adjustment.

Position the Air Conditioner in Window

®
tray. Check that feet
tray until window sash closes
A
B
C
®
tray needs
Incorrect Installation
A
B
C
A. Window sash
B. Top channel
C. Air conditioner
3. If the bottom of the air conditioner does not sit against the
bottom of the SMART-MOUNT
and adjust angle of tray until air conditioner sits against the
bottom of the tray.
IMPORTANT: The tray must slope downward slightly toward
the outside to provide proper drainage for the air conditioner.
A
B
A. Air conditioner sitting on SMART-MOUNT
B. SMART-MOUNT
®
Attach Side Curtains to Window
1. Pull left-hand curtain frame out until it fits into the window
channel. Repeat with right-hand curtain frame.
2. Insert one of the #8 x
" round-head screws through left-
hand curtain frame and into the window channel to fasten the
curtain frame to the window.
3. Repeat for right-hand curtain frame.
Front View
A
B
A
B
A. Hole for #8 x
B. Side curtain
B
®
tray, remove air conditioner
®
tray
tray
C
" round-head screw
9

Advertisement

Table of Contents
loading

Table of Contents