Starting Your Air Conditioner-Rotary Control-Cool Only Models - Whirlpool Air Conditioner Use & Care Manual

To Set theTemperature
To raise the temperature:
Press the plus button to raise the temperature. Each time you
press or hold the plus button, the temperature will go up 1º to a
maximum temperature of 86°F (30°C).
To lower the temperature:
Press the minus button to lower the temperature. Each time you
press or hold the minus button, the temperature will go down 1º
to a minimum temperature of 64°F (18°C).
To Set the Timer Delay
To set Timer to turn off the air conditioner (air conditioner
must be on):
1. Press TIMER. Timer indicator light on the air conditioner
control panel will flash.
Starting Your Air Conditioner—Rotary Control—Cool Only Models
Model 1
4
3 5
2 6
1 7
WARMER COOLER
T E M P E R A T U R E
Model 2
4
3 5
2 6
1 7
WARMER COOLER
T E M P E R A T U R E
TIMER
Wait three minutes before restarting
OFF
FAN
ONLY
POWER
SAVER
LOW
HIGH
COOL
COOL
MED
COOL
F A N S P E E D
Wait three minutes before restarting
OFF
FAN
ONLY
LOW
COOL
HIGH
COOL
F A N S P E E D
2. Press the plus or minus button to change the delay time from
1 to 24 hours.
3. Press TIMER again or wait 10 seconds. Timer indicator light
on the air conditioner control panel will remain on.
To set Timer to turn on the air conditioner, keeping
previous settings:
1. Turn off the air conditioner.
2. Press TIMER. Timer indicator light on the air conditioner
control panel will flash.
3. Press the plus or minus button to change delay time from 1 to
24 hours.
4. Press TIMER again or wait 10 seconds. Timer indicator light
on the air conditioner control panel will remain on.
To set Timer to turn on the air conditioner, changing the
previous settings:
1. Turn on the air conditioner.
2. Adjust the mode to Cool, Fan, or Power Saver.
3. Adjust the fan speed to Turbo, High, Low, or Auto.
4. Adjust temperature between 64°F and 86°F (18ºC and 30ºC).
5. Turn off the air conditioner.
6. Press TIMER. Timer indicator light on the air conditioner
control panel will flash.
7. Press the plus or minus button to change delay time from 1 to
24 hours.
8. Press TIMER again or wait 10 seconds. Timer indicator light
on the air conditioner control panel will remain on.
Model 3
4
3 5
2 6
1 7
WARMER COOLER
T E M P E R A T U R E
1. Select the fan speed. See "Fan Speed."
2. Set temperature. See "Temperature."
Fan Speed
Set FAN SPEED to the desired setting. When the air conditioner
is operating at Low Cool, High Cool (on some models), Med Cool
(on some models) or Turbo Cool (on some models), the fan
circulates air continuously.
Turbo Cool (on some models)—for maximum cooling
High Cool (on some models)—for normal to maximum
cooling (depending on model)
Wait three minutes before restarting
OFF
FAN
ONLY
LOW
COOL
HIGH
COOL
TURBO
COOL
F A N S P E E D
13