ST STM32Cube Quick Start Manual page 33

• To configure selected sensors, you can:
•
Use one of the available device configuration examples in
Utilities/STWIN.box_config_examples
•
Configure the board through ST BLE Sensor or Real Time Plot GUI
Note: ODR (Output Data Rate) and FS (Full Scale) fields are
enumerated values defined in the Device Template Model. Please refer
to chapter 2.5.5 and DATALOG2 DTM for the mapping between the
enum values and the corresponding ODR and FS values.
Modify device and sensors configuration
For backward compatibility, it is still possible to
define a custom sensor configuration by editing one
of the available examples. Be aware that it is an
error-prone procedure we do not recommend.
33