continuity modules in
connectors RIMM3 and RIMM4
matched pair of memory modules
in connectors RIMM1 and RIMM2
matched pair of memory modules
in connectors RIMM3 and RIMM4
matched pair of memory modules
in connectors RIMM1 and RIMM2
Removing a Memory Module
Shut down the computer (see page 33).
1
NOTICE: To disconnect a network cable, first unplug the cable from your
computer and then unplug it from the network wall jack.
Turn off any attached devices and disconnect them from their
2
electrical outlets.
Disconnect the computer power cable from the wall outlet, and then
3
press the power button to ground the system board.
back of computer
back of computer
HINT: Memory
purchased from Dell is
covered under your
computer warranty.
Adding Pa rts
95