96
A d d i n g Par ts
Open the computer cover (see page 84).
4
Press out the securing clip at each end of the memory module
5
connector.
Grasp the module and pull up.
6
If the module is difficult to remove, gently ease the module back and
forth to remove it from the connector.
Adding a Memory Module
Shut down the computer (see page 33).
1
NOTICE: To disconnect a network cable, first unplug the cable from your
computer and then unplug it from the network wall jack.
Turn off any attached devices and disconnect them from their
2
electrical outlets.
Disconnect the computer power cable from the wall outlet, and then
3
press the power button to ground the system board.
Open the computer cover (see page 84).
4
Press out the securing clip at each end of the memory module
5
connector.