Closing the Computer Cover
Ensure that all cables are connected, and fold cables out of the way.
1
Gently pull the power cables toward you so that they do not get caught
underneath the drives.
Ensure that no tools or extra parts are left inside the computer.
2
Close the cover:
3
Pivot the cover down.
a
Press down on the right side of the cover until it closes.
b
Press down on the left side of the cover until it closes.
c
Ensure that both sides of the cover are locked. If not, repeat step 3.
d
NOTICE: To connect a network cable, first plug the cable into the network
wall jack and then plug it into the computer.
Connect your computer and devices to electrical outlets, and turn
4
them on.
107
Adding Pa rts