Voltage Dips - Broadcom F5D7010CE2 Test Report

CETECOM Inc.
Test report no.:EMC_381EN489-17_2002

VOLTAGE DIPS

According to EMC basic standard (EN 61000-4-11 [13])
1.For the table top EUT the distance to the reference ground plane should be 80 cm.
2.The test level shall be – a vol. Reduction of the supply vol. of 30% for 10ms; 60% for 100ms
and >95% for 5000ms
Failure Criteria
Failure Criteria obesrved
for each test 3 repetitions in an interval of 10 s
time for decrease or increase of supply voltage: T down/up < 5 µs (due to switching
ominal start by trigger
supply angle
voltage (AC)
U 1
100% U N :
n 230V
¨
100% U N :
n 230V
¨
100% U N :
n 230V
¨
n.r.r – no reaction recognized
Note: This test does not apply due to the fact that EUT's power suuply is host
dependant.
Issue date:2003-01-10
duration of
test voltage
T U2
0°° 10 ms
0°° 100 ms
0°° 5000 ms
reaction of EUT during and after
test voltage
U 2
70% U N
n 161 V
n.r.r – performance criteria A
¨
40% U N
n 92 V n.r.r – performance criteria A
¨
0% U N
0 V performance criteria C observed
Page 18 (25)
result
test
observed
observed
N/A
N/A
N/A