Broadcom Brocade G710 Hardware Installation Manual page 9

G710-Install-IG100 Installation Guide
11. Trunk Port Group 2 (SFP+ FC Ports 8-15)
12. Trunk Port Group 3 (SFP+ FC Ports 0-7)
Nonport-Side View of the Device
The nonport side of the device is used solely for air flow.
Figure 2: Nonport-Side View
Device Management Options
You can use the management functions built into the device to monitor the fabric topology, port status, physical status, and
other information. This functionality helps you analyze switch performance and accelerate system debugging. The device
automatically performs a power-on self-test (POST) each time it is turned on. A RASLog message is generated for any
detected startup errors.
You can manage the device using any of the management options that are listed in the following table.
Table 2: Management Options for the Device
Management Tool
Command line interface (CLI)
Up to two admin sessions and four user
sessions simultaneously.
Brocade Web Tools
Standard SNMP applications
Management Server
Brocade SANnav
Brocade SANnav must be purchased
separately.
Out-of-Band Support
Ethernet or serial connection
Ethernet or serial connection
Ethernet or serial connection
Ethernet or serial connection
Ethernet or serial connection
®
Brocade G710 Switch Hardware Installation Guide
Reference Documents
Brocade Fabric OS Administration Guide
Brocade Fabric OS Command Reference Manual
Brocade Fabric OS Web Tools User Guide
Brocade Fabric OS MIB Reference Manual
Brocade Fabric OS Administration Guide
Brocade Fabric OS Command Reference Manual
Brocade SANnav ™ documentation set
G710-Install-IG100
9