Broadcom Brocade G710 Hardware Installation Manual page 5

G710-Install-IG100 Installation Guide
Introduction
This guide contains installation procedures and safety requirements for installing your switch into a rack system or as a
stand-alone device.
Also provided are steps to initially configure the Brocade
to install transceivers and cables. Complete technical specifications for the switch are also included.
Supported Hardware and Software
The following tables list the rack mount kits supported on the Brocade G710 Switch.
Table 1: Rack Mount Kits
Part Number
XBR-R000070
XBR-R000162
XBR-000165
Notes, Cautions, and Danger Notices
Notes, cautions, and danger statements may be used in this document.
NOTE
A Note provides a tip, guidance, or advice, emphasizes important information, or provides a reference to related
information.
CAUTION
A Caution statement alerts you to situations that can be potentially hazardous to you or cause damage to
hardware, firmware, software, or data.
DANGER
A Danger statement indicates conditions or situations that can be potentially lethal or extremely hazardous to
you. Safety labels are also attached directly to products to warn of these conditions or situations.
Contacting Technical Support for Your Brocade
If you purchased Brocade
provider for all your product support needs.
•
OEM and solution providers are trained and certified by Broadcom to support Brocade products.
•
Broadcom provides backline support for issues that cannot be resolved by the OEM or solution provider.
•
Brocade Supplemental Support augments your existing OEM support contract, providing direct access to Brocade
expertise. For more information on this option, contact Broadcom or your OEM.
•
For questions regarding service levels and response times, contact your OEM or solution provider.
Slide rack mount kit.
Fixed-mount kit for four-post racks.
Mid-mount (Telco) kit for two-post racks.
®
product support from a Broadcom
®
G710 Switch for operation, to verify and monitor operation, and
Description
®
OEM or solution provider, contact your OEM or solution
®
Brocade G710 Switch Hardware Installation Guide
®
Product
G710-Install-IG100
5