Saving Your Configuration Changes; Cee Cli Rbac Permissions; Table 2 Cee Rbac Permissions - Dell 53-1002116-01 Administrator's Manual

2
CEE Command Line Interface
NOTE
The CEE configuration is not affected by configUpload and configDownload commands entered in
the Fabric OS shell.

Saving your configuration changes

Any configuration changes made to the switch are written into the running-config file. This is a
dynamic file that is lost when the switch reboots. During the boot sequence, the switch resets all
configuration settings to the values in the startup-config file.
To make your changes permanent, you must use either the write memory command or the copy
command to commit the running-config file to the startup--config file.
Saving configuration changes with the copy command
Perform this task from Privileged EXEC mode.
1. Enter the copy command to save the running-config file to the startup-config file.
Saving configuration changes with the write command
Perform this task from Privileged EXEC mode.
1. Enter the write memory command to save the running-config file to the startup-config file.

CEE CLI RBAC permissions

Role-Based Action Control (RBAC) defines the capabilities that a user account has based on the
role the account has been assigned.
are specifically defined as follows:
•
•
•
TABLE 2
CEE RBAC permissions
Root Factory UserID
OM OM OM
O = observe, OM = observe and modify, N = access not allowed
14
switch#copy running-config startup-config
switch# write memory
Overwrite the startup config file (y/n): y
Building configuration...
OM—When you enter the cmsh command, you are put directly into Privileged EXEC mode.
O—When you enter the cmsh command, you are limited to EXEC mode.
N—You are not allowed access to the CEE CLI.
User Operator SwitchAdmin
O N O
Table 2 displays the permissions matrix for CEE. Permissions
FabricAdmin ZoneAdmin
OM N
Dell Converged Enhanced Ethernet Administrator's Guide
BasicSwitchAdmin SecurityAdmin
N O
53-1002116-01