Debugging And Logging Commands; Table 25 Cee Flash Memory File Management Commands; Table 26 Debugging And Logging Commands - Dell 53-1002116-01 Administrator's Manual

NOTE
Use of the flash:// prefix is optional.
TABLE 25
Task
List the files in the Flash memory directory.
Delete a file from the Flash memory directory.
Erase all the files in the Flash memory directory.
NOTE: This command erases all the files in the
Rename a file in the Flash.
Display the contents of a file in the Flash memory
directory.

Debugging and logging commands

Table 26
Converged Enhanced Ethernet Command Reference contains complete information on all
available CLI commands.
Perform the following tasks from Privileged EXEC mode.
TABLE 26
Task
Display debugging information for CEE
components.
Display logging information for CEE components.
Display the collection of information needed for
technical support.
NOTE: The supportsave command in Fabric OS includes the debugging data provided by the above commands.
Dell Converged Enhanced Ethernet Administrator's Guide
53-1002116-01
CEE Flash memory file management commands
Flash directory except the default startup
configuration file which is programmed as
a manufacturing default.
describes the tasks related to debugging and logging commands on the switch. The
Debugging and logging commands
Debugging and logging commands
Command
switch#dir
switch#delete flash://example_filename
switch#erase flash
% Warning: Erasing flash filesystem will
remove all files in flash://.
Continue to erase?(y/n):y
switch#rename filename new_filename
switch#show file flash://example_filename
Command
switch#show debug
switch#show logging
switch#show tech-support
17
143