10
Queueing
To configure the QoS trust mode, perform the following steps from Privileged EXEC mode.
1. Enter global configuration mode.
2. Specify the 10-gigabit Ethernet interface.
3. Set the interface mode to 'trust'.
4. Exit the configuration mode and return to EXEC mode.
5. Enter the copy command to save the running-config file to the startup-config file.
Configuring user-priority mappings
To configure user-priority mappings, perform the following steps from Privileged EXEC mode.
1. Enter global configuration mode.
2. Specify the 10-gigabit Ethernet interface.
3. Set the interface mode to '3'.
4. Exit the configuration mode and return to EXEC mode.
5. Enter the copy command to save the running-config file to the startup-config file.
Creating a CoS-to-CoS mutation QoS map
To create a CoS-to-CoS mutation, perform the following steps from Privileged EXEC mode.
1. Enter global configuration mode.
2. Create the CoS-to-CoS mutation QoS map name. In this example 'test' is used.
3. Exit the configuration mode and return to EXEC mode.
4. Enter the copy command to save the running-config file to the startup-config file.
96
switch#configure terminal
switch(config)#interface intengigabitethernet 0/2
switch(conf-if-te-0/2)#qos trust cos
switch(conf-if-te-0/2)#exit
switch(config)#end
switch#copy running-config startup-config
switch#configure terminal
switch(config)#interface intengigabitethernet 0/2
switch(conf-if-te-0/2)#qos cos 3
switch(conf-if-te-0/2)#exit
switch(config)#end
switch#copy running-config startup-config
switch#configure terminal
switch(config)#qos map cos-mutation test 0 1 2 3 5 4 6 7
switch(conf-if-te-0/2)#exit
switch(config)#end
switch#copy running-config startup-config
Dell Converged Enhanced Ethernet Administrator's Guide
53-1002116-01