Displaying the FCoE login configuration
To display the FCoE login configuration, perform the following tasks.
Task
Display the FCoE login configuration. Syntax is as
follows:
•
•
•
Display the status of the last configuration merge
during the last fabric merge. This operand also
displays conflicting login groups and login groups
for non-existing switches.
Saving the current FCoE configuration
To save the current FCoE configuration, perform the following task.
Task
Save the current FCoE login configuration as the
effective configuration fabric-wide.
Creating and managing the FCoE login group configuration
Another important task in administrating FCoE is configuring the FCoE login information.
Creating an FCoE login group
The FCoE login group enables you to configure login policies.
Dell Converged Enhanced Ethernet Administrator's Guide
53-1002116-01
Creating and managing the FCoE login group configuration
-switch swwn—Displays all of the login
groups for the specified switch.
-logingroup lgname—Displays the login group
configuration for the specified login group.
-saved—Displays only the effective
configuration.
Command
switch:admin> fcoelogincfg --show [-switch swwn |
-logingroup lgname] [-saved]
switch:admin> fcoelogincfg --show [-mergestatus]
Command
switch:admin> fcoelogincfg --save
16
135