Displaying Or Aborting The Current Configuration Transaction; Cleaning Up Login Groups And Vn_Port Mappings - Dell 53-1002116-01 Administrator's Manual

16
Managing and displaying the FCoE login configuration
Perform one of the following tasks to toggle the availability of FCoE login configuration
management.
Task
Enable the FCoE login configuration management
on the switch (this is a switch-based command,
not port-based).
Disable the FCoE login configuration
management on the switch.
Displaying or aborting the current
configuration transaction
NOTE
The configuration changes created using the fcoelogingroup command are kept in a transaction
buffer until you save the buffer using the fabric-wide fcoelogincfg--save command. The login
configuration is saved as a transaction and to apply it you need to specifically save it.
Perform one of the following tasks to either display or abort the current configuration transaction.
Task
Display the current configuration transaction.
Abort the current configuration transaction.

Cleaning up login groups and VN_port mappings

To cleanup login groups and VN_port mappings, perform the following tasks.
Task
Perform a cleanup of all conflicting login groups
and VN_port mappings from the effective
configuration. This purges not only the conflicting
login groups but also the non-existing switches.
Perform a cleanup of all conflicting login groups
and conflicting VN_port mappings from the
effective configuration.
Perform a cleanup of all login groups for
non-existing switches from the effective
configuration.
134
Command
switch:admin> fcoelogincfg --enable
switch:admin> fcoelogincfg --disable
Command
switch:admin> fcoelogincfg --transshow
switch:admin> fcoelogincfg --transabort
Command
switch:admin> fcoelogincfg --purge
switch:admin> fcoelogincfg --purge -conflicting
switch:admin> fcoelogincfg --purge -nonexisting
Dell Converged Enhanced Ethernet Administrator's Guide
53-1002116-01