Table of Contents
Advertisement
7.
Reassemble the system as follows:
!
!
!
8.
Follow the instructions later in this chapter, "Performing the BIOS Update."
Performing the BIOS Update
Follow these steps to perform the BIOS update. Before you begin, be sure to:
Connect the computer to AC power, undock and power off the computer.
!
Configure the Boot Device Setup to boot from a floppy diskette.
!
Remove any bootable CDs from the CD-ROM drive.
!
Document all customized BIOS settings.
!
Insert the BIOS Update diskette into the file bay drive.
1.
Lift up the keyboard and align the tabs on the front of it with the grooves in the
system.
Reseat the keyboard in its original position.
Slide the keyboard retainers back onto the system.
Reassembling the system
Using the BIOS Setup Utility 3-35
Advertisement
Table of Contents
